Specifications

BEFORE YOU CALL FOR SERVICE

Check these points if... Metal markings appear on the

ceramic glass cooktop (select

The cooktop does not operate models)

• Are any house fuses blown or circuit breakers • Were metal pans slid across the cooktop,

tripped? especially aluminum.

• Is the cooktop properly connected to an

electric circuit in the house? Brown streaks and/or areas of

discoloration with a metallic

The cooktop elements do not get sheen appear on the ceramic glass

hot enough cooktop (select models)

• Are the snrfaee controls properly- set? • Were/hod boilovers burned into the cooktop?

• Is the voltage to the house low? • Were the bottoms of the pans clean to avoid

• Is the eool_vare bottom FLAT and not soil transfer to the cooktop?

oversized? • Was water with hard water minerals allowed

to evaporate on eooktop?

The elements emit a slight odor * Were correct cleaning products used to dean

and/or smoke when first turned on cooktop? (no ehlorine bleach, ammonia, rest

• This is normal, removers, oven cleaners)

lliny scratches or abrasions appear Chipping of the ceramic glass

on the ceramic glass cooktop surface (select models)

(select models) • Was a sugar solution, plastic or aluminum foil

• Is the surface free of coarse particles of sugar, allowed to remain on a hot eooktop surface?

dust, salt, etc. before you placed the pan on

the surface? For further assistance contact your Maytag

• Were proper cleaning products used when dealer or call Maytag Customer Serviee:

cleaning the surface? U.S. 1-800-688-9900

• Was glass cool.rare used? CANADA 1-800-688-2002

• Were pans with rough bottoms used on the

cooking surface?

Circuit Breaker e

Canadian Appliance Only

Your appliance is equipped with a circuit breaker

box. The box is located either on a wall or in a

cabinet next to or near the appliance. If part or _ e

all of the appliance does not operate, cheek to

see if one of the breakers has tripped. Reset the

breaker to the ON position. [ I

4 BREAKER BOX

PAGE 12