Specifications

Troubleshooting Procedures

WARNING

To avoid risk of electrical shock, personal injury, or death, disconnect power to oven before servicing, unless

testing requires it.

10 16025644

Problem Possible Cause Correction

Surface element does not

heat

Open element..............................................

Loose wire connection or broken wire.........

Failed infinite switch ....................................

• Check element for continuity,

replace if failed.

• Verify all connections are clean

and tight, replace broken wiring.

• Check infinite switch, replace if

failed.

Frequent cycling of surface

element or warming zone

Normal.........................................................

• Element cycles to maintain

proper heat and to prevent

damage to smoothtop.