Use & care guide

7, Select cycle
normal
sheets
whkebsU_
heavyl _ I
duty _ _
sanitary\\
with Oxi
drain & spin_
rinse & s )in
power wash
%colors/towels
_rapid
wash
| hand
i
an washer
soak withaffresh
estimated time remaining
Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose DELAY START option.
To choose a delay time:
1. Press POWER/CANCEL
2. Select the desired Cycle, Modifiers, and Options. Delay Start
not valid for Drain & Spin cycle.
3. Press + (plus) DELAY START. 1H (one hour) will be displayed
in the time display window. The indicator light for Delay will
glow.
4. For a longer delay time, press DELAY START + (plus). For a
shorter delay time, press DELAY START - (minus). The Start
Time will increase or decrease by 1-hour steps.
5. Press START/PAUSE The countdown in hours and minutes
to the wash cycle will show in the time display window and
the indicator light will begin to flash.
NOTE: The Start/Pause indicator light will not flash when
Delay Start is chosen. You must press START/PAUSE
to initiate a countdown for the cycle to begin. The cycle
selections and modifiers are lit during the Delay Start time.
To cancel delaying a cycle:
Press POWER/CANCEL once to cancel Delay Start or press
START/PAUSE to cancel the countdown and start the cycle.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
8, Select cycle modifiers
modifiers
m cold m cool
cold cold
I no
spin
m light
I warm m warm m hot wash temp |
cold warm cold rinse temp
J
auto temperature control
B low Ill medium m max [ spin speed }
extract
L J
Ii medium II heavy III extra I soillevel "]
heavy
L J
Once you select a cycle, the default settings for that cycle will
be lit. Press the Modifier buttons to change the Soil Level, Spin
Speed, and Wash/Rinse Temperature, if desired. Not all settings
are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Fabrics
Hot _:
Some cold water is added to save Whites and pastels
energy. This may be cooler than Durable garments
your hot water heater setting.
Warm
Some cold water will be added, Bright colors
so this may be cooler than what Moderate to light soils
your previous washer provided.
Cool - brights/darks
Warm water is added to assist Colors that bleed
Cold
Warm water may be added
to assist in soil removal
Dark colors that
bleed or fade
11