Specifications

18
TROUBLESHOOTING
See the “Use and Care Guide” to possibly avoid the cost of a service call.
220-240V~50Hz 1ph 3A max. IPX4
Maximum Power Absortion/Usage: 4700 Watts Moisture Resistance (Water Ingress, Rain Test): 5500-5600
European Country:
CZ, CY, ES, GB, GR, HR, IE, IT,
PT, SI, SK, TR
CY, CZ, DK, EE, FI, GR, HU, IT,
NO, RO, SE, SK, TR
CY, CZ, DK, EE, FI, GR, HU, IT,
NO, RO, SE, SK, TR
CZ, CY, ES, GB, GR, HR, IE, IT,
PT, SI, SK, TR
European Gas Category:
Gas Flow Rate:
Supply Pressure (G20):
TECHNICAL SPECIFICATIONS
Factory Adjusted Pressure:
II
2H3+
II
2H3+
II
2H3B/P
II
2H3B/P
30 mbar
20 mbar
30 mbar
N/A
N/A
FR, BE
I
2E+
20 mbar
N/A
25 mbar
28-30 mbar
N/A
37 mbar
N/A
0.562703 M
3
/HR
0.562703 M
3
/HR
20 mbar
7.4 mbar
7.4 mbar
Note: Conversion kit: From Natural Gas to LP Gas : Whirlpool Part No. W10233219.
Conversion kit: From Natural Gas to Natural Gas - France/Belgium: Whirlpool Part No. W10184947.
Manufacturer: Whirlpool Corporation, Benton Harbor, Michigan 49022, USA.
European Country:
European Gas Category:
Butane Supply Pressure (G30):
Adjusted Pressure:
Adjusted Pressure:
Adjusted Pressure:
Propane Supply Pressure (G31):
European Country:
European Gas Category:
Supply Pressure (G20):
Supply Pressure (G25):
Factory set for NATURAL GAS: Injector: 2,2 mm Heat input gross: 5,9 kW
With LP Gas Conversion Kit: Injector size: 1,25 mm Heat input gross: 6,4 kW
With France/Belgium NATURAL GAS conversion kit: Injector size: 1,65 mm Heat input gross: 5,9 kW
Dry Linen Capacity
IEC Capacity
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few of the
valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reects a maximum
load size that can be loaded into the dryer.
10,5 kg (23 lb)
7,5 kg (16,5 lb)
IEC Capacity: The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specic cycle.