Specifications

REVERSING
DOORS
Top Mount
Models
Only
Door reversal
is NOT
possible
on
those
models that
have a built-in
ice and water
lountain.
However,
if door
removal
becomes
necessary
please
see
the note
in
Step
9.
Unplug
Refrigerator.
lf
unit
is
in
use,
remove food
from fresh
food compartment
and
freezer com
partment.
Removing doors.
NOTE:
Taping doors shut
prior
to
physically
removing them
may
prevent
unnecessary
damage.
1. Remove hinge cover
from top of
treezer door by
removing screw.
2. Remove
three
(3)
screws
from hinge.
&
Lift
hinge
off of cabinet.
Open
freezer
door,
pivot
and
lift door
off of center
hinge
pin.
NOTE: Keep track at all
times the
position
of all spacers and
pads
when
removing them from doors.
Remove
center
pin
using
a 5116"
wrench.
Open
refrigerator door and
lift
door off
lower hinge
pin
and
place
to the side
for now.
Remove center
hinge by
removing
two
(2)
screws
using Torx-T27 drive.
Remove screws
from opposite side
of
the cabinet.
Flip
center
hinge
over
and reinstall on
left
side
of cabinet using
the
same
screws
you
just
removed from the
center
hinge. Reinstall screws that
were used on
the
opposite
side.
NOTE: lf door
removal is necessary
on those models with an ice and
water
fountain,
use
care in removing the
water
and
electrical lines
from the
hinge by
pulling
the water line
first
followed by
the
electrical
wires,
6.
L
7.
9.
4.
2-9