Spec Sheet

MY180030 2/18
SPECIFICATIONS
COMBINATION STACK
WASHER / DRYER – 60Hz MODELS
SIDE VIEW
BACK VIEW
See maytagcommerciallaundry.com
for complete warranty details.
Dimensions are for planning purposes only. See specific instructions for proper installation. Because of continuous product
improvement, Maytag reserves the right to change specifications without notice.
*Based on 2018 United States DOE J2 Testing with factory preset cycles.
**Use 4” (100mm) diameter rigid aluminum or galvanized steel duct. Never use plastic, non-metal, or combustible duct.
+It is recommended that a separate circuit serving only this washer / dryer be provided.
®/TM
© 2018 Maytag. All rights reserved.
MODEL – COIN READY/
CARD READY & NON-VEND
MLE22PDAYW/
MLE22PRAYW
MLG22PDAWW/
MLG22PRAWW
MLE22PDAZW/
MLE22PRAZW
U.S. / Int’l U.S. / Int’l Canada
Fuel Type Electric Gas Electric
WASHER SPECIFICATIONS
CAPACITY
Cylinder Volume — cu. ft. (liters) 3.10 (88) 3.10 (88) 3.10 (88)
Cylinder Diameter — in. (mm) 21.60 (547) 21.60 (547) 21.60 (547)
Cylinder Depth — in. (mm) 13.40 (340) 13.40 (340) 13.40 (340)
WATER INLET HOSE / DRAIN HOSE
Operating Pressure – psi (bar) 20 – 100 (1 – 8) 20 – 100 (1 – 8) 20 – 100 (1 – 8)
Inlet Hose Length — ft. (m) 4 (1.22) 4 (1.22) 4 (1.22)
Drain Hose Length — ft. (m) 6 (1.83) 6 (1.83) 6 (1.83)
APPROXIMATE WATER USAGE
Average Total Water Usage Per Cycle — gallons (liters)* 10.71 (40.50) 10.71 (40.50) 10.71 (40.50)
Average Hot Water Usage, Warm Water Cycle — gallons (liters) .71 (2.69) .71 (2.69) .71 (2.69)
Average Hot Water Usage, Hot Water Cycle — gallons (liters) 2.71 (10.26) 2.71 (10.26) 2.71 (10.26)
ELECTRICAL REQUIREMENTS+
Voltage 120V N/A N/A
Electrical Requirements / Frequency 60Hz N/A N/A
Breaker / Fuse – amps 30 N/A N/A
DIMENSIONS – DOOR OPENING – IN. (MM) 14.25 (362) 14.25 (362) 14.25 (362)
EXTRACT SPEED — MAX G-FORCE / MAX RPM 300 / 1,000 300 / 1,000 300 / 1,000
MOTOR SIZE — HP (KW) .09 (.07) .09 (.07) .09 (.07)
INTEGRATED WATER FACTOR (IWF)* 3.5 3.5 3.5
MODIFIED ENERGY FACTOR (MEF
J2
)* 2.2 2.2 2.2
DRYER SPECIFICATIONS
CAPACITY
Cylinder Volume — cu. ft. (liters) 6.70 (190 ) 6.70 (190) 6.70 (190)
Cylinder Diameter – in. (mm) 26.3 (666.8) 26.3 (666.8) 26.3 (666.8)
Cylinder Depth – in. (mm) 20.4 (518.3) 20.4 (518.3) 20.4 ( 518.3)
ELECTRICAL REQUIREMENTS+
Voltage 240V 120V 240V
Electrical Requirements / Frequency 60Hz 60Hz 60Hz
Breaker / Fuse – amps 30 15 40
DIMENSIONS – DOOR OPENING – IN. (MM) 18.25 (464) 18.25 (464) 18.25 (464)
DRYER EXHAUST DUCT DIAMETER – IN. (MM)** 4 (100) 4 (100) 4 (100)
AIRFLOW (CFM) 215 (6.10) 230 (6.5) 215 (6.10)
ELECTRIC HEATING ELEMENT (WATTS) 5,600 N/A 5,250
GAS RATING — BTU/HR. (KCAL/HR.) N/A 24,000 (6,048) N/A
GAS INLET SIZE N/A 3/8 NPT N/A
MOTOR SIZE – HP (KW) .33 (.25) .33 (.25) .33 (.25)
MACHINE SPECIFICATIONS
DIMENSIONS
Width — in. (mm) 27 (686) 27 (686) 27 (686)
Depth — in. (mm) 29.50 (751) 29.50 (751) 29.50 (751)
Height — in. (mm) 74 (1,880) 74 (1,880) 74 (1,880)
CRATED DIMENSIONS
Crated Width — in. (mm) 29.25 (743) 29.25 (743) 29.25 (743)
Crated Depth — in. (mm) 34 (864) 34 (864) 34 (864)
Crated Height — in. (mm) 75.75 (1,924) 75.75 (1,924) 75.75 (1,924)
APPROXIMATE WEIGHT
Uncrated — lbs. (kg) 372 (169) 378 (171) 372 (169)
Crated — lbs. (kg) 383 (173) 389 (176) 383 (173)
MAYTAG CONNECT 360°™ TECHNOLOGY COMPATIBLE Yes Yes Yes
ADA-COMPLIANT Yes Yes Yes