Installation Instruction

5
TOOLS & PARTS
Tools Needed:
8" (203 mm) or 10" (254 mm)
Pipe Wrench
8" (203 mm) or 10" (254 mm)
Adjustable Wrench That Opens
to 1" (25 mm)
Flat-Blade Screwdriver Phillips Screwdriver
Torx
®†
T-20 Security
Screwdriver or Bit
1" (25 mm) Hex-Head
Socket Wrench
5⁄16" Socket Wrench
Pliers
(that open to 1
9
/
16
" [39 mm])
Level
Utility Knife
1/4" (6 mm) Nut Driver
Locking Pliers
Caulk Gun and Caulk
(for installing new exhaust vent)
Vent Clamps
Pipe-Joint Compound
Suitable for Gas Type
27" (686 mm) Wood Block
Flashlight (optional)
1/2" (13 mm) and 9/16"
(14 mm) Open-End Wrenches
Ruler or Measuring Tape
Parts Supplied:
Water Inlet Hoses (2)
Inlet Hose Washers (4)
U-Shaped Hose Form
Transit Bolt Hole Plug (4)
Beaded Tie Strap
Drain Hose/Clamp
†
® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.