Spec Sheet

MODELS
MDG30 (PC) MDG76 (PC)
CAPACITY
Number of Dryer Pockets 1 1
Cylinder Volume Each Pocket — cu. ft. (liters) 12.27 (347) 22.40 (634)
Cylinder Diameter Each Pocket — in. (mm) 30 (762) 44.5 (1,130)
Cylinder Depth Each Pocket — in. (mm) 30 (762) 24.88 (632)
Dry Load Capacity Each Pocket — lb (kg) 30 (13.60) 75 (34)
GAS SPECS/AIRFLOW
Drive Motor Size – hp (kW) ½ (.37) 1 (.75)
Blower Motor Size – hp (kW) - -
Airflow Type Radial Radial
Airflow — cfm (cmm) 600 (17) 1,200 (34)
Gas Inlet Size — in. .50 M.N.P.T. .75 F.N.P.T.
Heat Input, Gas — btu/hr (kcal/hr) 90,000 (22,680) 204,000 (51,407)
Number of Exhausts 1 1
(D) Exhaust Duct Diameter — in. (mm) 8 (203) 10 (254)
ELECTRICAL REQUIREMENTS
Breaker Fuse – Amps 15 20
DIMENSIONS
(A) Depth — in. (mm) 43 (1,092) (1,027) 35 (889)
(B) Width — in. (mm) 31.38 (797) 46.18 (1,173)
EzFit™ Dryer – Fits Through 36” Door Opening
Yes Yes
(C) Height — in. (mm) 72 (1,829) 84.31 (2,142)
(H) Door Opening — in. (mm) 21.50 (546) 31.38 (797)
(E) Height to Bottom of Door — in. (mm) 32 (813) 31 (787)
(F) Height to Center of Exhaust — in. (mm) 20-1/4 (514) 16-3/4 (425)
(G) Width to Center of Exhaust — in. (mm) 6-1/4 (159) 10 (254)
APPROXIMATE WEIGHT
Uncrated — lb (kg) 535 (243) 888 (403)
Crated — lb (kg) 585 (265) 938 (425)
CONTROL/USER INTERFACE
Control Type Microprocessor Microprocessor
Display Type Digital Digital
Vended Controller Yes Yes
OPL Controller No No
CONSTRUCTION
Cylinder Galvanized Steel Galvanized Steel
Top Painted CRS Painted CRS
Front White White/Stainless Steel
Sides Painted CRS Painted CRS
Dimensions are for planning purposes only. See specific instructions
for proper installation. Because of continuous product improvement,
Maytag reserves the right to change specifications without notice.
®/™ © 2020 Maytag. All rights reserved.
MY200036 9/20
MULTI-LOAD DRYERS
TRADITIONAL LINE – VEND: 30 LB AND 75 LB
FRONT VIEW
TOP VIEW
BACK VIEW
GAS MULTI-LOAD DRYERS
120V/60 HZ/1 PHASE
A
C
B
D
E
F
G
H