Spec Sheet
5-YEAR LIMITED WARRANTY
ALL PARTS COVERED
For a period from the date of original purchase through the time
listed above, the designated parts that fail in normal commercial
use will be repaired or replaced free of charge for the part itself, with
the owner paying all other costs, including labor, transportation
and customs duty. Chemical damage is excluded from all
warranty coverage. See complete warranty for details.
®
/™ ©2016 Maytag. All rights reserved. 3/16
MAYTAG
®
SUPER-CAPACITY DRYER
MICROPROCESSOR CONTROLS, CARD READY
MAXIMUM EXHAUST DUCT LENGTH
PER NUMBER OF TURNS
Number Of
90° Turns
Rigid Metal Vent
Box Hood and Angled Hood
Louvered Style Style
0 135 ft. (41.2 m) 129 ft. (39.3 m)
1 125 ft. (38.1 m) 119 ft. (36.3 m)
2 115 ft. (35.1 m) 109 ft. (33.2 m)
3 106 ft. (32.3 m) 100 ft. (30.5 m)
4 98 ft. (29.9 m) 92 ft. (28.0 m)
Flexible Metal Vent
Box Hood and Angled Hood
Louvered Style Style
0 76 ft. (23.2 m) 62 ft. (18.9 m)
1 71 ft. (21.6 m) 57 ft. (17.4 m)
2 67 ft. (20.4 m) 53 ft. (16.2 m)
3 65 ft. (19.8 m) 51 ft. (15.6 m)
4 63 ft. (19.2 m) 49 ft. (14.9 m)
DRYER SPECIFICATIONS
MODEL MDE/MDG28PR
MOTOR
Single-phase, thermoprotected against overload,
auto-reset
Yes
HP (kw)
1
⁄3 (.25)
Tumble speed—RPM 50 ± 1
CAPACITY
Cu. ft. (liters) 6.7 (190)
AIRFLOW
Gas models—cfm (cmm) 230 (6.5)
Electric models—cfm (cmm) 215 (6.1)
SOUND LEVEL (export model only)
Sound pressure level, Lpa (dbA) (Kpa: ± 10dbA) 58
ELECTRICAL REQUIREMENTS
MDE model—voltage 240V/60Hz
MDG model—voltage 120V/60Hz
BREAKER/FUSE MIN. REQUIREMENTS
MDE model—amps 30
MDG model—amps 15
ELECTRIC HEATING ELEMENT
Domestic models —watts 5,600
Canadian models —watts 5,250
GAS RATING
MDG model—BTU/hr. (kcal/hr.) 24,000 (6,048)
EXHAUST DUCT DIAMETER—IN. (MM) 4 (100)*
ELECTRONIC BURNER IGNITION
MDG model Yes
GAS INLET
MDG model—in. 3/8 N. P.T.
ADJUSTABLE LEVELING LEGS Yes
APPROXIMATE WEIGHT
Crated—lbs. (kg) electric/gas 160 (73)/113 (74)
Uncrated—lbs. (kg) electric/gas 147 (67)/150 (68)
DIMENSIONS
Width—in. (mm) 27 (686)
Depth—in. (mm) 29 (737)
Height—in. (mm) 39.25 (997)
Door opening diameter—in. (mm) 18.25 (464)
OPTIONAL PEDESTAL ADDS:
Height—in. (mm) 2.75 (70)
* Use 4" (100 mm) diameter rigid aluminum or galvanized steel duct. Never use plastic, non-metal or
combustible duct.
See specific instructions for proper installation. Because of continuous product improvement,
Maytag reserves the right to change specifications without notice.
OUR COMMITMENT TO DEPENDABLE QUALITY
For well over 50 years, Maytag
®
Commercial Laundry has promised and delivered
dependability. We create that quality by making durable washers and dryers, built
to endure heavy use and last for years. We design our machines to perform reliably
and to produce consistent results. Finally, we give our washers and dryers the power
to do their jobs thoroughly, cleaning and drying laundry quickly and efficiently—and
justifying the trust that has been placed in us for generations.
MDE/MDG28PR
SUPER-CAPACITY DRYER
MG16016_MDEMDG28PRC_Spec.indd 2 3/3/16 6:58 PM