Instructions / Assembly

7
Wall
Wall

O × 1
Q × 1
 No.
& QTY
Step 15
1. Place unit against wall and mark hole for anti-tip rope.
2. Drill a hole in wall make sure the hole is slightly smaller than Anchor (N)
then gently tap Anchor (N) into hole.
3. Attach the anti-tip rope on wall by using Washer (O) and Long Screw (Q).
①
H × 1
O × 1
P × 1
 No.
& QTY
Step 14
Attach anti-tip rope on the Back Support Bar  by using screw (H) and
Washer (O) as indicated.
Carefully insert drawer into unit.
Step 13