User's Manual

NOMAD - NRT202
O
PERATING
I
NSTRUCTIONS
P
AGE
14 of
14
9. MAINTAINENCE AND CAR E
The NRT202 terminal has been designed to give reliable service in the
intended environment and is largely maintenance free.
9.1 CLEANING
Periodically wipe the barcode window and front face of the terminal with a
damp cloth to remove dirt. If necessary a water based cleaner may be used
to remove stubborn deposits.
DO NOT USE SOLVENT CLEANERS.
9.2 BATTERIES
With normal use the expected life time of the supplied batteries is 500
charge/discharge cycles, after which they should be replaced. For optimum
performance it is recommended that the batteries be replace annually.
9.3 KEYPAD
On no account should the keys of the terminal be pressed with sharp or hard
objects - including fingernails. Use of such objects may result in premature
failure of the keypad.
10. SPECIFICATION
Power 2x 1.2V 700mAh NiMH AAA.
Average Consumption 25mA
Charging Input 9- 15V DC @ 55mA max
Radio link frequency 915MHz
Barcode symbology Code 39
Environmental protection IP64