Instructions / Assembly

Attach Legs (part A and B) to the Support Panel

(part C) using 4 - M5x45mm wood screws (part G).

Make sure the logo faces outward and pre-drilled

holes face upward as shown. Top surface of cross

support should be aligned parallel with the top and

bottom surface of the legs.

Repeat for the other side using the Sup-

port Panel without the logo (part D).

With 2 - M5x45mm wood screws (part G), attach

one shelf (part E) to the first leg assembly. Align

the pre-drilled holes as shown ensuring the

counter sunk feature is facing upward. Underside

of the shelf is labelled “bottom”.

Repeat Step 3 to attach the shelf to the

second leg assembly.

Attach the table top (part I) to the leg assembly with

M6x50mm truss screws (part H). Install two truss

screws per leg. There are no pre-drilled holes in the

table; however, the screws will self-tap into the

plastic.

Power Drill

(recommended)

Install the adjustable feet (part F) in the

bottom of each leg.

Add the second shelf (part E) and secure it

with 4 - M5x45mm wood screws (part G).

Assembly Guide