Instruction Manual

Kwik-File

Arc-In-The-Box

Unload Instructions

Verify components and quantities per factory packing list.

Assembly requires two people.

Measure actual space that your system will occupy and compare

with layout sketch. Also note configuration of ARC units if more

than one unit is involved.

Warning:

PAGE 1
Kwik-File Arc-In-The-Box Unload Instructions Warning: Verify components and quantities per factory packing list. Assembly requires two people. Measure actual space that your system will occupy and compare with layout sketch. Also note configuration of ARC units if more than one unit is involved.
PAGE 2
Required Tools: Suggested Industrial Equipment to maneuver an ARC-In-The-Box: Pallet Sizes: If Arc is moved with a two wheel Dolly:
PAGE 3
1. Position Arc The floor should be firm so that the ARC is effectively leveled. When positioning ARC unit, place letter unit no closer than 5-1/4" from wall, legal unit no closer then 6-1/2" from wall.
PAGE 4
2.
PAGE 5
3. Connecting ARC Units 4.
PAGE 6
Accessories Stationary Shelf
PAGE 7
R o ll - O u t F e a t u r e s Fig. 7.
PAGE 8
Reference Shelf Customer Satisfaction This order has been inspected for Quality and Quantity. If we have not satisfied this commitment to you, please call CUSTOMER SERVICE 1-800-822-8037 Thank you for your business.