Quick Start Guide

Adjust the Dead Zone Update the Software
Additional Functions
Using Bluetooth Headset (Only for Switch mode / LED Red)
Press and hold the Button START and D-Pad Left or D-Pad Right. Once the LED on the adapter
stas to blink, you may release the Button D-Pad Left or D-Pad Right, BUT keep holding the
Button START.
To increase or decrease the dead zone, press the D-Pad “Up” or “Down”.
As soon as you get the right dead zone value, you may release the Button START to quit the
process.
There are 7 levels of the Dead Zone Value. The
default one is Level 3.
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7
0% 2.5% 5% 7.5% 10% 12.5% 15%
You can know the Dead Zone Level by the times of the LED
blinking during the adjusting process. For example, LED on
the adapter blinks 3 times then stops when Dead Zone
Level is Level 3.
0% 5% 7.5% 10% 12.5% 15%2.5%
D-Pad “Up”
D-Pad “Down”
Power on your Bluetooth headset to enter into the pairing mode.
Press the pair button on the side of the adapter, LED stas to blink rapidly, wait for a few
seconds.
LED becomes solid when the connection is successful.
If you are having problems with the adapter, you can follow the below instructions to update.
Download the software from http://www.mayash.com/Suppo
and install it on your Windows system.
Double click on the updater and leave the updater window
open on your screen.
Press and hold the button on the side of
the adapter, and connect the USB from
your adapter into any spare po on your
PC. Wait for 3-5 seconds.
As soon as the adapter has been
recognized, you may release the button.
Only one Bluetooth controller is suppoed for one adapter.
A wired USB controller and a wireless Bluetooth controller can be connected at the same time,
but both of them have the same functions and can only play one game character.
Select “Update”.
Do not disconnect the device until you are
informed that the update is completed
successfully.
To disconnect the controller and the
adapter, press the button on the side of
the adapter. But if you want to disconnect
the Xbox Elite 2 and the adapter, you need
to press and hold the HOME button on
your controller to shut o the power.
To switch A-B,B-A,X-Y,Y-X, press and hold the button “START” and “A” for 3 seconds.To switch
A-A, B-B, X-X, Y-Y, press and hold the button “START” and “B” for 3 seconds. (This function is
optional. It depends on the dierent controllers.)
The Touch Pad button on the PS4 Controller works as the Capture button of the Joy-Con or
Switch Pro controller when you connect your PS4 controller to the Switch system by the adapter.
Please see more details about the other controllers on the below “Controllers Buttons Table”.
Note:
*
Switch mode (LED is Red) does not suppo 6-axis
motion and vibration.
If you need the 6-axis motion and vibration,
please go to Switch Pro mode (LED is Purple).
*
R1L1
SHARE
OPTIONS PS
Beat the
Drum Left
Beat the
Drum Right
Beat the
Drum Left
Beat the
Drum Right
PS4 Taiko Drum POV
LB RB
LT RT
VIEW HOMEMENU
L3 LSXbox Series X/S R3 RS POV
VIEW MENU
+
LB RB
LT RT
VIEW
HOME
MENU
L3 LSXbox One R3 RS POV
VIEW MENU
+
R1L1
Create PSOPTIONS
L3 LSPS5 DualSense Pressing TpadR3 RS POV
L2 R2
L1 R1
SELECT START
PS Classic POV
L2 R2
R1L1
SHARE OPTIONS PS
L3 LS Pressing TpadR3 RS POV
L2 R2
DualShock 4
L1 R1
SELECT START
PS
L3 LSR3 RS POV
SELECT
START
+
L2 R2
DualShock 3
HOME
L3 LS
L
R
R3 RS POV
Switch Pro
ZL ZR
or+
HOME
L3 LS
L R
R3 RS POV
Joy-Con
ZL ZR
or+
BACK
START HOME
L3 LSXbox 360 R3 RS POV
BACK START
+
LT RT
LB RB
X/Y Axis X/Y CirclePC-Xinput
HOMEZ- Z+POV
X/Y Axis Z Axis CirclePC-Dinput
POV
HOME
L3 LSWii U Pro R3 RS POV
ZL ZR
+
L R
HOME
LSWii Classic Pro RS POV
+
ZL ZR
L R
HOME
LSWii mote + Nunchuck POV
+
Z+
SELECT START
NEOGEO mini
Joystick
Joystick
START
GENESIS mini Controller POV
POV
STARTMODE
MEGA DRIVE mini Controller POV
POV
SELECT START Options
Stick
NEOGEO Arcade Stick PRO
White Button White ButtonGray Button Gray Button
HOME
Beat the
Drum Left
Beat the
Drum Right
Beat the
Drum Left
Beat the
Drum Right
Switch Taiko Drum POV Capture
L R
This device complies with pa 15 of the FCC
Rules. Operation is subject to the following
two conditions:(1) This device may not cause
harmful inteerence, and(2) this device must
accept any inteerence received, including
inteerence that may cause undesired
operation.