User manual

N>Trans Manual - Maycom Audio Systems – Page 16
AGC+Noisegate
•
Off ALC and Noisegate are turned off
• Voice Recommended setting for voice recordings
• Music Recommended setting for music recordings
Gain
• -95.5…+31.5 dB Slider control for manual gain adjustment
Tip:
If you need to adjust the gain slider more than 20dB, consider changing the Pre Amp setting.
Monitor
•
Off No Monitoring
• On Monitor the active input channels via direct hardware loopback.
Note: The input monitor is mixed on the output with the sounds played by any application and is only
active when a recording stream is running.
Minimize to Tray
With this button you can dismiss the Configurator window back to the systemtray.
If you need it again, double-click the purple microphone icon.
When you right click in the application or the systemtray icon, you can find the following options in the context
menu:
N>Trans Configuration…
Opens the configuration window (same as double click).
Always show on insert
Disable this option if you don’t want the Configurator to appear upon card insert.
Start With Windows
Disable this option if you don’t want the Configurator to start with Windows.
About…
Display version info
Exit
Closes the utility. To start it again, look for it in the start menu.
Go to: <Start> <Programs> <Maycom> <N>Trans Configurator>
Note: Other recording parameters such as sample-width and sample-frequency are determined by the recording
application settings.