User's Manual

Maisto Radio Control Vehicles
The packaging and instruction manual contain important information. Please keep them for future reference.
Contents:
RC vehicle x 1
RC transmitter x 1
Instruction manual x 1
Battery Requirement :
Vehicle : 3 x 1.5V "AA" / LR6 alkaline batteries (not included).
Transmitter : 1 x 9V (6F22) battery (not included).
INSTALLING OR REPLACING THE BATTERIES :
For Transmitter:
1. Switch the power OFF.
2. Open the battery cover.
3.
4. Close the battery cover.
For Vehicle:
1. Switch the power OFF.
2. Open the battery cover using a screwdriver (not included).
3.
4. Fasten the battery cover.
HOW TO PLAY :
1. Switch ON the transmitter.
2. Switch ON the vehicle.
3. Drive the vehicle forwards and backwards by pressing the FORWARD and BACKWARD buttons respectively.
4. Turn the transmitter steering wheel to move the vehicle left or right.
5. If the vehicle does not run in a straight line, adjust the wheel alignment lever on the vehicle chassis.
6. Remember to switch OFF the transmitter and vehicle power after playing.
Performance Tips:
1. Do not drive on grass, dirt, sand, carpet or go through water.
Install a new 9V Battery with correct polarity (+/-) as shown inside the
battery compartment.
Install three new AA 1.5V batteries with correct polarity (+/-) as shown
inside the battery compartment.

Summary of content (3 pages)