User's Manual
The packaging has to be kept since it contains important information.
Contents:
Project 66 x 1
Transmitter x 1
Transmitter antenna x 1
Instruction Manual x 1
Project 66: Installation of Batteries
1. Switch the power OFF.
2. Open the battery cover using a screwdrive.
4.
Transmitter: Battery and Antenna Installation
1. Switch the power OFF.
2. Open the battery cover.
4. Close the battery cover.
5. Screw the antenna into the transmitter securely.
How to play:
1. Fully extend the antenna of the transmitter.
2. Match the transmitter with the Project 66 Channel (Channel A or B or C).
3. Switch ON the transmitter, the transformation button will light up.
4. Switch ON the Project 66.
5. Use the transimitter's levers and buttons to control the movement, transformation and shooting of Project 66
A. Movement
i. Push the left / right lever up or down to move the Project 66.
Maisto Radio Control Pro
j
ect 66
Take out the battery compartment and install six new 1.5V AA
batteries with correct polarity (+/-) as shown inside the battery
copartment.
Insert the battery compartment back and fastern the battery cover.
Install a new 9V battery with correct polarity (+/-) as shown
inside the battery compartment.
!
Warnin
g
! Do not aim at e
y
es or face
Warning! There are hazardous of using projectiles other
than those supplied or recommended by the manufacturer.
3.
3.