Instructions / Assembly

3
FOLLOW ALL INSTRUCTIONS AND BE CAUTIOUS OF SAFETY SYMBOLS.
All electrical wiring must be performed by a certified licensed electrician.
Although this manual is a universal manual, the information within this
manual is applicable to each sauna.
High Voltage Symbol: Be cautious as there is the presence of a high
voltage current that flows through the equipment!
General Caution Symbol: Be cautious as the equipment uses electrical
current that can cause serious injury.
1. Please read this Owner’s Manual thoroughly before use. This will allow the user to
become familiar with the operation of the control system. Please keep the Owner’s
Manual available for future reference. If any technical assistance or repairing is needed,
please contact the manufacturer.
2. The sauna will need to be installed outdoors. If installed outdoors and over time, water
may seep into the sauna room. When not in use and placed outdoors, a rain cover is
recommended to cover the sauna room if your model does not come with an actual
outdoor roof. Please note that water seepage will not hurt the wood and will usually dry
quickly due to the heated environment. If you want to keep the sauna completely dry,
you will need to install the sauna under a covered structure.
3. To reduce the risk of electric shock and/or fire, do not expose the control system to direct
water contact or rain. Do not open the cover to the control system as there are high
tension fittings that can be dangerous. Only dealer authorized qualified
technicians should make any needed or necessary repairs at any time.
4. Any repairs, alterations, or modifications to the control system are not authorized unless
by an approved repair technician. Any non-authorized repairs, alterations, or
modifications can lead to serious injuries and can cause the unit to work
outside its intended specification parameters.
5. Any non-authorized repairs, alterations, or modifications will void the warranty.
6. Before connecting the unit to a power source, please make sure that all wires, cords,
and connections are connected properly. If there are any concerns, please consult with
a certified electrician.
7. Make sure that the sauna is placed in a well-ventilated area. It should not be placed in
an area with other thermal-radiating objects. Make sure that the vents will not be
obstructed for proper air flow.