Instructions / Assembly

2
Thank you for your purchase. As you remove the parts from the boxes, be sure to examine
them for damages. If your unit has any damages or missing parts, please contact Golden
Designs Inc. See the Warranty section for more information.
A Certified Licensed Electrician will be needed to install the electrical wiring. Due to the
heat of the sauna, it is required that copper wire with 90
o
Celsius rating be used. Aluminum
wiring cannot be used in this application. Consult with your electrician regarding the
electrical requirements in your area. All wiring must be in accordance with all national,
state, and local codes and regulations. Your electrician will supply the needed wiring and
connections.
Sauna models without a specific outdoor roofing cannot be placed directly in the weather
elements. These models, if placed outdoors, can be placed under a covered structural
such as a patio. Before assembling, make sure the surface in which the sauna will be
placed on is level/dry and can support the weight of the sauna and its occupants. We
recommend a concrete base or wood deck to support the sauna. If you will be placing the
sauna directly on the ground, you must use such materials as concrete cinder blocks or
other similar supporting structure to prevent the sauna from settling into the ground over
time.
For sauna models specifically designed to be outdoors, the wood can withstand the
weather elements with proper maintenance. The outdoor model saunas were designed to
be placed in the rain and sun. Please note that the natural weathering elements will
change the color of the wood over time. For sauna models placed directly in the weather
elements, you will have some water seepage. The water seepage will not damage the
sauna and usually dries quickly when the sauna is in operation.