Manualshelf

Instructions / Assembly

ManualsBrandsMaxxus ManualsHome SpasGDI Series 3-Person Indoor/Outdoor Wet/Dry Sauna In Treated Hemlock with Traditional Steam Heater Includes Accessories
11121314151617181920
16
H. Installing the EXTERIOR ROOF PANEL
1. Locate the two triangular OUTER ROOF PANEL supports. Use the provided
screws to screw the triangular OUTER ROOF PANEL supports to the FRONT
WALL PANEL and REAR WALL PANEL. (see Figure 7)
Figure 7
2. It is now time to install the OUTER ROOF PANELS. The OUTER ROOF PANELS
will have the asphalt shingles (facing outward). Locate the LEFT SIDE OUTER
ROOF PANEL and note that the ROOF LIGHTS will be at the front of the sauna
when installing it over the triangular supports. Do not screw down until the RIGHT
SIDE OUTER ROOF PANEL has been installed. There will be a wood trim around
three sides of the inside of the OUTER ROOF PANELS that fit inside the two
triangular supports and LEFT SIDE WALL PANEL and RIGHT SIDE WALL
PANEL. Once both of the OUTER ROOF PANELS have been installed, use the
screws to secure the OUTER ROOF PANELS into place. You can use the
provided screws to screw the two OUTER ROOF PANELS together and down to
the triangular supports. (see Figure 8)