Instructions / Assembly

To reduce the risk of death, personal injury or property damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards read all
warnings and instructions included with and on the fixture box and all
fixture labels.
Before installing, servicing, or performing routine maintenance upon
this equipment, follow these general precautions.
DO NOT INSTALL DAMAGED PRODUCT!
CAUTION:
Turn off the switch and circuit breaker before installing this LED lamp.
Suitable for dry locations.
Not for use with dimmers.
Install directly beneath a ceiling-mounted receptacle.
Use only insulated staples or plastic ties to secure the cord.
Not intended for recessed installation or on ceiling.
Do not install directly over a heat source (stove, etc.)
Use safety precautions. Safety eye g
lasses and gloves are recommended.
Installation should not be made on a radiant-heating ceiling.
Injury to people and damage to the lamp and/or mounting surface may result if the lamp is pulled from the surface.
To reduce the likelihood of such injury or damage, mount only on a mechanically sound surface.
Do not alter the plug or power supply cord in any way or try to install this product in
any other method besides
method shown on this sheet.
NOTICE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
T
o install onto a plaster board surface, plaster board requi
res minimum 3/8” thick.
Picture is for illustration purposes only.
Your model may vary.
Models:
MSL-404400F, 4400 lumens, frosted lens
MSL-404800C, 4800 lumens, clear lens
Rated: 120V 60Hz AC ONLY 40W
Linkable: Connect/Link shoplights together, 4 units maximum
NO SERVICABLE PARTS!
General Safety Information
Five Year Warranty:
Maxxima extends a 5 year limited warranty to the original purchase that the products
listed are free from defects in material and/or workmanship only. Maxxima will replace
any warranteed product to the original consumer/purchaser if the product fails because
of defects due to workmanship and/or materials within the limited warranty period.
Limited warranty is not transferable and applies to the original installation of the
Maxxima product. This offer does not constitute in any way a product guarantee and
Maxxima does not hereby assume any obilgation whatsoever beyond sending a free
replacement product.
LED Shop Light Installation Instructions