Use and Care Manual

OPERATING INSTRUCTIONS

2. ADJUSTING AIR SPEED

The fan has three speeds (LOW,

MEDIUM and HIGH).

Pull the chain of the speed control switch on

the back of the unit to adjust air flow

to desired speed.

CARE AND MAINTENANCE

• Unplug from electrical source to clean.

• Use soft, damp cloth to clean. Following that, wipe with clean, dry cloth.

• Do not bend the fan blades.

• Store in a dry place.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

Fan won’t run. 1. Fan is not plugged in.

2. Unit is not turned on.

3. GFCI needs to be

reset.

1. Make sure unit is plugged in.

2. Check that unit is turned on.

3. Unplug fan and follow the

instructions on page 6 to

reset GFCI plug.

Oscillating feature not

working.

1. Oscillating feature is

not turned on.

1. Make sure that oscillation

switch is turned on.

Before returning to your retailer, call our customer service department at

1-800-433-1626