Installation Guide
Table Of Contents
- ICE MAKER SAFETY
- IMPORTANT SAFEGUARDS
- TECHNICAL INFORMATION
- INTRODUCTION
- COMPONENT LOCATIONS
- ICE MAKER INSTALLATION
- INSTALLATION TYPES
- OPERATION
- MIM50P and MIM50P-O DRAIN SYSTEM OPERATION
- CLEANING AND MAINTENANCE
- CONTROL PANEL
- MAJOR FUNCTIONS
- TROUBLE SHOOTING
- SÉCURITÉ ET MACHINE À GLAÇONS
- MESURES DE PROTECTION IMPORTANTES
- RENSEIGNEMENTS TECHNIQUES
- INTRODUCTION
- EMPLACEMENTS DES COMPOSANTS
- INSTALLATION DE LA MACHINE À GLAÇONS
- Retirer le matériau d’emballage
- Nettoyage avant l’utilisation
- Dégagements pour l’installation
- Exigences en matière d’électricité
- Méthode recommandée de mise à la terre
- Mise de niveau de la machine à glaçons
- Inverser l’ouverture de porte pour MIM50-O et MIM50V
- Inverser l’ouverture de porte pour MIM50, MIM50P et MIM50P-O
- Alimentation en eau
- Outils requis
- Évacuation
- TYPES D’INSTALLATION
- UTILISATION
- FONCTIONNEMENT DU SYSTÈME D’ÉVACUATION MIM50P et MIM50P-O
- NETTOYAGE ET ENTRETIEN
- PANNEAU DE COMMANDE
- FONCTIONS IMPORTANTES
- DÉPANNAGE
- SEGURIDAD DE LA MÁQUINA DE HACER HIELO
- DISPOSICIONES DE SEGURIDAD IMPORTANTES
- INFORMACIÓN TÉCNICA
- INTRODUCCIÓN
- UBICACIONES DE COMPONENTES
- INSTALACIÓN DE LA MÁQUINA DE HACER HIELO
- Quitar los materiales de empaque
- Limpieza antes de usar
- Espacio de separación para la instalación
- Requisitos eléctricos
- Método recomendado de conexión a tierra
- Nivelar la máquina de hacer hielo
- Cómo cambiar el sentido en que abren las puertas de MIM50-O y MIM50V
- Cómo cambiar el sentido en que abren las puertas de MIM50, MIM50P y MIM50P-O
- Suministro de agua
- Herramientas necesarias
- Desagüe
- TIPOS DE INSTALACIÓN
- OPERACIÓN
- OPERACIÓN DEL SISTEMA DE DESAGÜE DE MIM50P Y MIM50P-O
- LIMPIEZA Y MANTENIMIENTO
- PANEL DE CONTROL
- FUNCIONES PRINCIPALES
- SOLUCIÓN DE PROBLEMAS
- Blank Page
- Blank Page
11/07/2017 PK
3
TECHNICAL INFORMATION
Model:
MIM50 / MIM50V
MIM50-O
MIM50P
MIM50P-O
Description 50lb Indoor Ice Maker
50lb Outdoor Ice
Maker
50lb Indoor Ice Maker
50lb Outdoor Ice
Maker
Voltage:
120V/60Hz/1Ph,
220V/50Hz/1Ph
120V/60Hz/1Ph,
220V/50Hz/1Ph
120V/60Hz/1Ph,
220V/50Hz/1Ph
120V/60Hz/1Ph,
220V/50Hz/1Ph
Amps
(ice making/
harvesting):
3.0 / 4.0 3.0 / 4.0 3.0 / 4.0 3.0 / 4.0
Ice Type:
Slab Cube
Slab Cube
Slab Cube
Slab Cube
Ice Cube Size:
7/8" x 7/8" x 7/8"
7/8" x 7/8" x 7/8"
7/8" x 7/8" x 7/8"
7/8" x 7/8" x 7/8"
Power Consumption:
12.2kWh / 100lbs of
ice
12.2kWh / 100lbs of
ice
12.2kWh / 100lbs of
ice
12.2kWh / 100lbs of ice
Unit weight:
84 lbs / 38 kg
83 lbs / 38 kg
86 lbs / 39 kg
86 lbs / 39 kg
Maximum ice storage:
25 lbs
25 lbs
25 lbs
25 lbs
Ice-making capacity:
50 lbs/day*
50 lbs/day*
50 lbs/day*
50 lbs/day*
Unit Dimensions:
14
5
/
8
" x 23
5
/
8
" x 33"
14
5
/
8
" x 23
5
/
8
" x 33"
14
5
/
8
" x 23
5
/
8
" x 33"
14
5
/
8
" x 23
5
/
8
" x 33"
Internal blue LED light
when door is open
No No Yes Yes
Drain Pump
No
No
Yes
Yes
*The actual quantity of ice produced per day can vary with room and water conditions.
The technical data and performance index listed above is subject to change and should be used for reference only.
INTRODUCTION
The Maxx Ice MIM50 ice maker series produce hard, gourmet cube ice and offers convenience for homeowners, restaurants and
hotel guests. An insulated ice storage bin is built in.
• A cold water supply is needed.
• A gravity drain is needed.
This user’s manual is intended as a resource for persons installing, using and servicing the MIM50 series. It contains valuable
information on safety and maintenance. Maxx Ice strongly recommends that this manual be kept in a place where it can be accessed
when needed.
The MIM50 series is designed and manufactured according to the highest standards of safety and performance. It meets or
exceeds the safety standard of UL563 and sanitation standard NSF12.
Maxx Ice assumes no liability or responsibility of any kind for products manufactured by Maxx Ice that have been altered in any way,
including the use of any parts and/or other components not specifically approved by Maxx Ice Warranty & Parts. Maxx Ice reserves the right
to make design changes and/or improvements at any time. Specifications and designs are subject to change without notice.