Use and Care Guide

3. Using a flathead screwdriver, remove the four plug buttons from the screw

holes on the door.

4. Using a phillips screwdriver, remove the magnet baffle and door switch baffle.

Place them on the opposite side at the top of the door.

5. Push the four plug buttons into the spare screw holes.

To replace door on hinges:

1. Using a flathead screwdriver, remove the plug buttons from the screw holes

opposite the door hinges, top and bottom.

2. Replace the axis on door hinge 1 and tighten it firmly. Remove door hinge

1and place it on the opposite bottom side.

3. Remove door hinge 2, place on the opposite top side. Separate the axis from

hinge 2 and set it aside.

4. Keep the handle apart from the hinge side. Align the door on the bottom hinge

1 and replace axis on the hige2 .Tighten it firmly.

5. Push the plug buttons into the original screw holes.

See Figure below.