Owner's Manual

Maxx Air Portable Evaporative Cooler

1.0 Introduction

• Your Maxx Air was tested 3 ways. Your unit was tested for 1. Maximum air flow at operating static pressure.

Only Maxx Air is tested in operating conditions with 2. Water and 3. Electricity before it is shipped.

• Maxx Air is easy to operate – needs only tap water and electricity to operate.

• Maxx Air is easy to move – roll your Maxx Air to the area you want to cool. Maxx Air comes standard with straight

and swivel / lock casters which make moving your Maxx Air a breeze.

1.1 Quick Start – Your Quick Start Information is located inside the

information packet shipped with your unit.

Look on the front of your Maxx Air packaging in a plastic sleeve.

1.2 Evap-O-Matic Tablet – Chemical Water Treatment. Operate your unit

for 2 weeks – then, flush out old water – add clean water – then add ½

Chemical Water Treatment tablet. Note: Tablet makes water foam which

can cause unit to spray water temporarily (for a day or two). You can

order more tablets by calling 1.800.433.1626.

2.0 How Evaporative Cooling Works

Keeping in mind that regular fans only circulate same temperature air -

same humidity – your Maxx Air portable evaporative cooler takes that

same existing air, combines it with evaporating water (which dramatically lowers the temperature) immediately relieving

hot, dry areas, similar to the conditions when a natural rain storm approaches, the temperature drops noticeably cooler,

because the air is saturated with water. Because your air is now saturated with water it becomes noticeably cooler. In high

humidity areas the temperature will not be as cool – however, the Maxx Air was engineered efficient to evaporate

perspiration and sweat from employees to keep them cooler.

3.0 Unpacking your new Maxx Air unit

Note: Carefully examine your Maxx Air shipping carton for damage

before opening. If your carton is damaged – notify the shipper immediately!

Your EC18” unit was shipped strapped a wooden pallet inside a cardboard box.

First remove the straps then you may open the cardboard box. Your Maxx Air

comes with a box of casters. Attach swivel casters to fan side of unit and straight

casters to pad side. Use a 3/8” wrench to attach casters.

4.0 Set-up your Maxx Air unit.

Roll your Maxx Air unit to a level surface and lock the swivel casters to prevent

accidental movement.

Electrical cord for 120V, 15Amp connection.

Note: Standard ¾” water connection for

utility water source under 60 p.s.i.

How the Maxx Air portable

evaporative cooler works