Assembly Instructions
Installation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 10.
1. The Supporting Structure the Hoist is mounted
to must be designed to withstand the loads and
forces imposed by the Hoist for the rated load.
Figure A: Correct and incorrect
Suspension Hook attachment
2. Properly seat the Suspension Hook on the
Supporting Structure at its intended load
bearing point (shown in Figure A on the left).
3. Do not allow the Hook Hitch to support any part of
the load. Do not apply the load to the point of the
Suspension Hook (shown in Figure A on the right).