User's Manual

RF-GPS3009 PS3 Wireless Steering Wheel
 Sensitivity adjustment
1、Press and hold SELECT+START for 3seconds，the LED is on;
2、Press SELECT button, showing current sensitivity;
3、Press SELECT button again to select mode as following:
Middle (G-LED illuminates) highest (G-LED flash quickly) lowest (G-LED flash
slowly)
4、Press the UP on the D-pad to exit adjustment
 Low Power Consumption (sleep mode)
In order to save batteries power and prolong batteries life, the wireless wheel
features a sleep mode if it has not been used for a period of time. There are 2
ways getting into sleeping mode:
1. If the Steering Wheel is not connected with the console for over 4
minute, the Steering Wheel will turn OFF automatically,
2. If the Steering Wheel is connected to the console and not used for
over 3 minutes it will enter a Sleep Mode
To Exit the Sleep Mode, Press Start button on the Steering Wheel the LED will
then turn on.
 Low Voltage Alert
When the battery life of the steering wheel is low, the LEDs on the steering
wheel will begin to flash indicating the current batteries need to be replaced.
And the vibration function would be left to idle automatically.
WARNING: Please ensure that the batteries are inserted correctly. If they are
inserted incorrectly, it may cause personal injury as well as damage to your
Steering wheel.
 Force Connection
If there are more than one RF wheel working in the one operating environment,
use the Force Connect button to manually connect a steering wheel to its
respective receiver.