User's Manual

RF-GPS3009 PS3 Wireless Steering Wheel
Connection and installation
◎ Plug the receiver into PS3 console via USB port;
◎ Power on the console,
◎ Open the battery cover on the Wireless wheel and insert the 4xAA
Batteries into the battery compartment (Make sure you insert the
batteries the correct way - Observe Polarity markings)
◎ Connect the foot pedal with the wheel, turn the power switch of wheel
to ON position;
◎ You will notice the Receiver LED light will start to flash.
◎ Then the LED would turn stable to indicate the wheel has been
connected with the receiver successfully.
◎ It’s ready to play.
LED indication
1. 4 LEDs flashes simultaneously while connecting with PS3 console; press
HOME button to select mode, the LEDs would turn to be stable when well
connected
2. When you press and hold the HOME button for 2 seconds, a relevant
setting interface will pop up. After setup, the wheel will be default as analog
mode.
3. The LED number indication will represent the number of the controller
assigned to:
LED 1~4 = Player 1~4, LED1+4 = Player 5
LED 2+4 = Player 6, LED 3+4 = Player 7
Remarks:
If you unplug or plug the wheel into PS3 console or restart PS3 console, you
must press the HOME button for resetting
The vibration function needs to be supported by the game when playing
PS3/PS2 games on the PS3 console.
 Program function (no memory)