Users Manual

3. InserttheSIMcardintocardslotinthecorrectposition

4. Installbackcov erandbattery

Note：

DONOTremoveSIMcardwhenpoweredonasthismaydamagethecardandMX‐HUB

SettingupWi‐Ficonnectionorwiredconnection

Pressandholdthe“power”buttonfor3seconds untilthewelcomelogoisdisplayedonthe

LCD,andWi‐Fiison.

2. SetupWi‐Ficonnectionorwiredconnectionasbelow

3. MakesureMX‐HUBWi‐Fifunctionison

4. SelectStart>ControlPanel>NetworkConnections>WirelessNetworkConnection

5. Click“Viewavailablewirelessnetworks”toshowalistofavailableWi‐Finetworks.

6. Select the wireless network connection with the “MX‐HUB‐XXXX” Wi‐Fi’s SSID and click

“Connect”.Ifthesecuritymechanismisapplied,youneedtoenterthecorrectnetworkkey .

TheSSIDandnetworkkeylabelisavailableatthebatteryremovaldivot.

Note:XXXXisthelast4digitsofMACaddress(Capitalornumber).MaxLength32bits.

HowtochangetheSSID&Password

1. Logintohttp://192.168.1.1

orhttp://mifi.homeandenterthemanagementpage.

2. Select Settings>Wireless>WLAN Settings, then you will see “Wi‐FiName(SSID)” and

“Password”,Makesureyoudeletetheoldnameandpasswordandenterthenewnameand

passwordasyourequire.

3. Select“Apply”button,waitforthescreentodisplayprompting“Success”,andthenlogout.

4. Wa

it for the computer or laptop screento display the Wi‐Fi icon. This means the wireless

networkconnectionhasbeensuccessful.

ConnectingtotheInternet

IftheWi‐Fifunctionisturnedon,yourdeviceshouldconnecttotheinternetautomatically.

LoggingintotheDeviceManagementwebsite

1. Mak

esuretheend‐userdeviceisconnectedtotheMX‐HUB