Product Manual

 DO NOT modify the water pump in any way. Modifications can create hazards and will
also void the warranty.
 NEVER attempt to modify the water pump speed setting. The water pump speed is
present for safe and optimal performance of the water pump. If speed needs adjusting, it
must be done by factory personnel.
 NEVER attempt to connect external fuel sources in order to increase the water pump run
time. A larger tank at pressure or higher elevation will cause a leak from the carburettor
during operation. A fire and/or an explosion could result.
 Always turn off the water pump and remove the spark plug(s) or spark plug wire(s) before
working on the water pump to prevent accidental starting. Always discharge the capacitor
before working on the water pump head to prevent electrical shock. (See Maintenance &
Repair section of this manual for instructions on how to do this.)
 The running water pump gives off carbon monoxide, a poisonous gas that can kill you. You
CANNOT smell it, see it, or taste it. Follow all instructions for site selection and positioning
of the water pump and avoid inhaling fumes from the exhaust. If you start to feel sick,
dizzy or weak while using the water pump, shut off the water pump and get to fresh air
RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.
 Immediately turn off the water pump if any of the following conditions arise during
operation:
1. Excessive change in enginespeed, slow or fast;
2. Sparking or arcs;
3. Engine misfire;
4. Excessive vibration;
5. Flame or smoke or
6. Abnormal noise
 This product contains or emits chemical known to the Commonwealth of Australia to
cause cancer, birth defects or other reproductive harm. Avoid inhalation of exhaust.
 DO NOT operate the engine or handle any electrical equipment while standing in water,
while barefoot, while hands are wet or while in the rain or snow. An electric shock may
result.
 Avoid contact with bare wires, terminals, connections, etc. while the water pump is
running.
 If an electric shock accident occurs, immediately shut down the source of electrical power.
If this is not possible, attempt to free the victim from the live conductor. Avoid direct
contact with the victim. Use a non- conducting implement, such as a dry rope or board, to
free the victim from the live conductor. Administer/apply applicable first aid and get
immediate medical help.
 Never smoke near the running engine and never operate near sources of sparks or flames.