Product Manual

PRE-OPERATION CHECKS

UNPACK THE GENERATOR:

 Remove the generator from its

packaging.



 Inspect the generator to ensure that no damage has occurred in

shipping or handling. If the unit appears to be damaged, DO NOT

add fuel or attempt to start the generator.

Check to ensure that you received the following items:

1. Generator

2. 12V charging cables

3. Parallel output wire

4. Oil funnel

5. RV adaptor

ADDING THE ENGINE OIL

The generator has been shipped without engine oil. DO NOT add fuel

or start the engine before adding engine oil.

In order to add the motor oil, you will need to remove the site panel

from the unit (figure 1).

Using a #2 Phillips-head screwdriver, remove screws 1 and 2 (seen in

figure 1) and lift up and away to remove the side panel.