Product Manual
Table Of Contents
- IMPORTANT:
- IMPORTANT NOTICES:
- 6. CONTROLS AND FEATURES
- 8. ELECTRICAL CONNECTION:
- 8.1 CAPACITY:
- 8.2 POWER MANAGEMENT:
- To prolong the life of your generator and attached devices, follow these steps to add an electrical load:
- 8.3 CONNECTING ELECTRICAL LOADS:
- 8.4 PARALLEL CONNECTION WITHIN 2 GENERATORS:
- 8.5 BATTERY CHARGING:
- 9.1 PERIODIC MAINTENANCE:
- 9.3 ENGINE OIL REPLACEMENT
- 9.4 AIR FILTER MAINTENANCE
- 9.5 FUEL FILTER MAINTENANCE
- 9.6 DRAINING FUEL TANK/CARBURETOR
- 10.TROUBLESHOOTING:
- BELOW IS A LIST OF GENERATORS THAT ARE COVERED UNDER THIS WARRANTY:
- BELOW IS A TABLE OF PARTS THAT ARE LIMITED BY THIS WARRANTY
- DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITITATION OF IMPLIED WARRANTIES
- ONLINE ORDER RETURNS POLICY
- DAMAGED IN TRANSIT
- NOT AS ADVERTSIED /INCORRECT ITEM
- FAULTY PRODUCT
- CHANGE OF MIND
- VALIDRECEIPT
39
9.7 STORAGE
When preparing the generator for storage, allow the unit to cool for 30 minutes then
follow the guidelines below.
STORAGE TIME
PRIOR TO STORING
Less than 2 months n Drain fuel from tank and dispose of in a suitable
container according to state and local ordinances.
2 months to 1 year
n
Drain fuel from tank and dispose of in a suitable
container according to state and local ordinances.
1 year or more n Remove spark plug.
n Drain fuel from tank and dispose of in a suitable
container according to state and local ordinances.
n Put a tablespoon of engine oil into the spark plug cylinder.
Turn the engine slowly with the pull rope to distribute the
engine oil.
n Reinstall spark plug.
n Change engine oil.
n After removal from storage, fill with fresh gasoline.
NOTE: If storing fuel in suitable container for later use, make sure fuel has been
treated with fuel stabilizer according to stabilizer manufacturer’s instructions.