Product Manual
Table Of Contents
- IMPORTANT:
- IMPORTANT NOTICES:
- 6. CONTROLS AND FEATURES
- 8. ELECTRICAL CONNECTION:
- 8.1 CAPACITY:
- 8.2 POWER MANAGEMENT:
- To prolong the life of your generator and attached devices, follow these steps to add an electrical load:
- 8.3 CONNECTING ELECTRICAL LOADS:
- 8.4 PARALLEL CONNECTION WITHIN 2 GENERATORS:
- 8.5 BATTERY CHARGING:
- 9.1 PERIODIC MAINTENANCE:
- 9.3 ENGINE OIL REPLACEMENT
- 9.4 AIR FILTER MAINTENANCE
- 9.5 FUEL FILTER MAINTENANCE
- 9.6 DRAINING FUEL TANK/CARBURETOR
- 10.TROUBLESHOOTING:
- BELOW IS A LIST OF GENERATORS THAT ARE COVERED UNDER THIS WARRANTY:
- BELOW IS A TABLE OF PARTS THAT ARE LIMITED BY THIS WARRANTY
- DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITITATION OF IMPLIED WARRANTIES
- ONLINE ORDER RETURNS POLICY
- DAMAGED IN TRANSIT
- NOT AS ADVERTSIED /INCORRECT ITEM
- FAULTY PRODUCT
- CHANGE OF MIND
- VALIDRECEIPT
30
the generator to the battery. Battery Charging is performed using
the 12V DC outlet only.
8.5.2 Be sure the Throttle switch is turned “OFF” while charging the
batteries.
8.5.3 Be sure to connect the red battery charger lead to the positive (+)
battery terminal, and connect the black lead to the negative (-)
battery terminal.DO NOT reverse the positions.
8.5.4 Connect the battery charger leads to the battery terminals
securely so that they do not disconnect due to the engine
vibration or other disturbances.
8.5.6 Change the battery by following the instructions in the owner’s
manual of the battery.
8.5.7 The DC Circuit Breaker will turn “OFF” automatically if the current
exceeds the rated output.
8.5.8 To restart charging the battery, turn the DC protector on by
pressing its button to the “ON” position.
8.5.9 Refer to the owner’s manual of the battery to determine charging
times.
Note: Never start or stop the generator with electrical
devices plugged in or turned on.