Product Manual
Table Of Contents
- IMPORTANT:
- IMPORTANT NOTICES:
- 6. CONTROLS AND FEATURES
- 8. ELECTRICAL CONNECTION:
- 8.1 CAPACITY:
- 8.2 POWER MANAGEMENT:
- To prolong the life of your generator and attached devices, follow these steps to add an electrical load:
- 8.3 CONNECTING ELECTRICAL LOADS:
- 8.4 PARALLEL CONNECTION WITHIN 2 GENERATORS:
- 8.5 BATTERY CHARGING:
- 9.1 PERIODIC MAINTENANCE:
- 9.3 ENGINE OIL REPLACEMENT
- 9.4 AIR FILTER MAINTENANCE
- 9.5 FUEL FILTER MAINTENANCE
- 9.6 DRAINING FUEL TANK/CARBURETOR
- 10.TROUBLESHOOTING:
- BELOW IS A LIST OF GENERATORS THAT ARE COVERED UNDER THIS WARRANTY:
- BELOW IS A TABLE OF PARTS THAT ARE LIMITED BY THIS WARRANTY
- DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITITATION OF IMPLIED WARRANTIES
- ONLINE ORDER RETURNS POLICY
- DAMAGED IN TRANSIT
- NOT AS ADVERTSIED /INCORRECT ITEM
- FAULTY PRODUCT
- CHANGE OF MIND
- VALIDRECEIPT
20
RECOMMENDED ENGINE OIL:
Only use 4 stroke automotive oil (API or SE) alternatively you can use a
higher grade (SG, SH or SJ). SAE 15W-40 is recommended for general all
temperature use. If single viscosity oil is used, select the appropriate viscosity
for the average temperature in your area.
7.3 ADDING FUEL:
When adding the fuel to the generator, make sure the unit is sitting on a
flat level surface, if the unit is hot please wait till it is cool before refilling with
fuel. ALWAYS fill the tank outdoors with the machine turned off.
Do not overfill the tank, otherwise it may overflow when the fuel warms up
and expands.
Note: For safety reasons once the fuel has been added to this unit it cannot
be returned to the place of purchase, please contact MAXWATT for
all service-related enquiries.
Petrol