Product Manual

14
Do not overload the generator. Low Oil Alarm (Red)
When the engine oil falls below the required level the Low Oil Alarm will
come on and the engine will stop automatically. The engine will not restart
until oil is added to the unit to bring it up to the appropriate level.
6.3 TO RESET THE GENERATOR
6.3.1 Turn off any connected electric devices and stop the engine.
6.3.2 Reduce the total wattage of the connected electric devices within
the rated output.
6.3.3 Use in proper ventilated areas. Maintain at least 1m of clearance
on all sides for adequate cooling.
6.3.4 After checking, restart the engine.
Note:
The Overload Alarm may come on for a few seconds when first using
electrical devices that require a large starting current, such as compressors,
pumps or refrigerators. When starting the unit, if the Low Oil Alarm light
flickers and the engine will not start, you will need to add engine oil before
attempting to restart the engine. The generator should only be operated on
a level surface.DO NOT operate the generator on loose ground or obvious
inclines. The low oil shutdown feature may be prematurely activated causing
the engine not to start.
Caution