Product Manual
Allow the engine to cool completely before servicing the spark
arrester.
Remove the spark arrester, check and clean with a wire
brush.
Replace spark arrester if its damaged.
KEEP GENERATOR CLEAN
If dust or debris accumulates on the generator, clean the generator with a damp cloth or so
bristle brush. DO NOT allow air intakes to become blocked.
Note: DO NOT spray generator with a garden hose or pressure washer. Water may enter the
generator and cause damage to the rotor, stator or internal windings.
PETROL TANK FILTER
Stop the engine and turn off the main switch
Turn the fuel valve to the OFF posion
The petrol tank filter is located directly under the petrol cap to protect impuries
from entering the fuel tank during refuelling.
Remove the filter and wash thoroughly in a solvent and let dry.
Re- assemble.
SPARK PLUG REPLACEMENT
Proper spark plug clearance ensures the engine’s normal running:
Stop the engine and turn off the main switch
Remove the spark plug wire from the spark plug and then remove spark
plug from the generator
Inspect spark plug for damage and clean with a wire brush before
installing. Replace spark plug if necessary.
Adjust the electrode gap to 0.7 to 0.8 mm if necessary.
Seat spark plug in posion and thread by hand to prevent cross
threading. Reconnect spark plug wire.
Tighten spark plug and put the cap back on the spark plug.
CLEANING AIR FILTER
Maintaining an air filter in proper condion is essenal. Dirt induced through improperly
installed, improperly serviced or inadequate elements damages and wears out engines. Stop
the engine and turn off the main switch.
Remove the air cleaner cover and locate the air filter.
Remove the air filter and wash it in hot soapy water then
let it dry.
Lubricate the air filter with clean engine oil and squeeze to
remove excess oil.
Replace air filter if necessary.
Secure the air filter and cover back o
n to the side panel.
30