Product Manual

ENGINE KEY ST ART IGNITION
SWITCH
LOW OIL IND ICATOR
Engine start and on/off switch control.
The low oil level indicator light illuminates
When the oil level is too low. If the engine
DC BREAKER runs low on oil during opera
on, the
Protects the generator against overload or engine will stop opera
ng within 10
short circuit of the 12-Volt DC system. seconds.
If the circuit breaker trips, turn off and unplug
all appliances from the generator and let the
DIG ITAL METER
overload cut-out switch cool. This digital display shows Voltage,
Then press DC reset bu
on before Frequency and Run Time (by hours).
commencing to use the DC outlet.
ROTCETORP LAMREHT
12V OUTLET
Thermal overload protec
device.
Can be used for 12V DC powered devices. Push to reset.
Maximum output 8.3 amps.
240V 15A AC OU TLETS - IP66
RCD AFETY WITCH
Each outlet is capable of delivering the
generator’s full output or 15 AMPS
(3600 wa
s), whichever is the lesser.
GROU ND T ERMINAL
The frame terminal can be used by a
licensed electrician to earth the
generator if necessary.
S S
RCD is a switch automatically turns off in the
event of electrical overload. This switch can
also be used to turn off power supply to each
AC outlet.