Product Manual

10. Reattach the spark plug and spark plug cap.

11. If the generator includes a battery, disconnect and

charge according to Generator Battery.

12. Clean the generator according to Generator

Maintenance.

13. Store the generator in a cool, dry place out of direct

sunlight.

7. ENGINE CARE:

Perform the following steps to protect the cylinder, piston,

rings from corrosion:

a) Remove the spark plug, pour about one table

spoon of SAE 10w-30 or 20w -40 motor oil into

the spark plug hole and reinstall the spark plug.

Recoil start the engine by turning over the

engine several times (with the ignition off) to

coat the cylinder walls with oil.

b) Pull the recoil starter until you feel compression

then stop pulling this will prevent the cylinder

and valves from rusting.

c) Clean the exterior of the generator and apply a

rust inhibitor.

d) Always store the generator in a dry, well