Product Manual

50
Change oil when the engine is warm. Refer to
the oil specification to select the proper grade of
oil for your operating environment.
1. Remove the oil drain plug
2. Allow the oil to drain completely.
3. Replace the drain plug.
4. Remove oil fill cap/dipstick to add oil.
5. Add up to 0.6 qt. (0.6 L) of oil and replace
oil fill cap/dipstick. DO NOT OVERFILL.
6. Dispose of used oil at an approved waste
management facility.
NOTE: Once oil has been added, a visual check
should show oil about 1-2 threads from running
out of the fill hole. If using the dipstick to check
oil level, DO NOT screw in the dipstick while
checking.
5.4 AIR FILTER MAINTENANCE