Product Manual

42
RECOMMENDED ENGINE OIL:
Only use 4 stroke automotive oil (API or SE) alternatively
you can use a higher grade (SG, SH or SJ). SAE 15W-40
is recommended for general all temperature use. If single
viscosity oil is used, select the appropriate viscosity for
the average temperature in your area.
ADDING FUEL:
Do not overfill the tank, otherwise it may overflow when
the fuel warms up and expands.
Note: For safety reasons, once the fuel has been added to this
unit it cannot be returned to the place of purchase, please
contact Gentech Industries for all service-related enquiries.
Use clean, fresh, regular unleaded fuel with a
minimum octane level of 85.
DO NOT mix oil with the fuel.
Always clean the area around the fuel cap.
Remove the fuel cap.
Be sure that the fuel strainer is in place.
Slowly add the fuel to the tank.
Do not exceed the red marker position of the
fuel filter.