Product Manual

41
In order to add engine oil, you will need to remove
the side panel from the generator see Figure 1.
Place the generator on a level
surface.DO NOT tilt the generator
while adding oil. It can cause you to
overfill the oil and or cause the oil leak
into areas in which it is not intended.
Remove the oil filler cap seen in figure
2.
Using the funnel provided, fill with 0.6L
of SAE10W-30 or 15W-40 (SEE
FIGURE 3) See figure 4 for proper oil
level.
Replace the fuel cap and secure the
side panel with the screws provided.
Ensure that the correct amount of oil is
used of 0.4L.