Product Manual

23
Please consult a qualified electrician, electrical inspection or
the local agency having jurisdiction:
In some areas, generators are required to be
registered with local utility companies.
If the generator is used at a construction site, there
may be additional requirements that must be
observed.
GROUNDING THE GENERATOR
Standard generators are protected by electrical separators.
This equipment has a thermic protection device and/or
magnet-to-thermic device to protect against a surge of current,
overloading and short-circuiting. In these cases, the generator
should under NO circumstances, be earthed using the terminal
“PE” or with any other part of the generator.
If a licenced electrician installs the generator with a connection
to your building’s electrical circuit for use as a back-up power
system, grounding may alternatively be completed through the
building’s grounding system. Ask your electrician.