Product Manual

29
One-Button Start:
3-1. Turn the MAIN switch
to the “ON” position (Fig.
16).
3-2. Hold down the
ENGINE START/STOP
switch for 3 seconds (Fig.
17).
NOTE: If the engine does not
start, release the switch and
Remote Start:
3-1. Turn the MAIN switch to
the “ON” position (Fig. 16).
3-2. Hold down the REMOTE
START switch for 3 seconds
(Fig. 17).
NOTE: If the engine does not
start, release the switch and try
again. Keeping the switch in the
start position too long can
damage the starter.
Fig. 16
try again. Keeping the switch
in the START position too
long can damage the starter.
One-Button
Start:
Remote Start:
START
NOTE: If you have repeated failed attempts to start the engine,
please consult the troubleshooting guide.
5. Allow the generator to run for several minutes before
attempting to connect any electrical devices. This allows
the generator to stabilize its speed and temperature.
STOP
Fig. 17
SHUTTING OFF THE GENERATOR
CAUTION: Unplugging running devices can cause damage to the generator. Never stop the engine with
electrical devices connected and running.
1. Turn off all electrical devices prior to unplugging
them from the generator. Unplugging running
devices can cause damage to the generator.
2. Allow generator to run at no load for a few minutes
to stabilize internal temperatures.
3. Turn the ENGINE switch to the “OFF” position
(Fig. 18).
4. Turn the FUEL switch to the “OFF” position (Fig. 18).
Fig. 18
WARNING: Allow the generator to cool down before touching areas that become hot during use.
CAUTION: Allowing petrol to sit in the fuel tank for long periods of time can make it difficult to start the
generator in the future. NEVER store the generator for extended periods of time (over 2 months) with fuel
in the fuel tank. Refer to “STORING THE GENERATOR”.