Product Manual

CONTROL PANEL

1. Fuel Switch

2. Data Center

Voltage, Run Time, Frequency

3. Indicator Light

Output indicator, Overload alarm, Low oil alert

4. Main Breaker

5. Grounding Nut

Ground generator to reduce risk of electric shock

6. AC Receptacles

7. Main Switch

8. Engine START/STOP switch

9. Parallel Operation Outlets

Connect two inverter generators through a

parallel connection kit for a higher output

10. Low Idle

Turn ON to increase fuel economy and runtime

when the load is below 75% load

11. RCD Switch

12. DC 5V USB Outlets

LOW IDLE

This generator is equipped with a LOW IDLE Switch

(Fig. 1). Engaging this switch allows the system to regulate the

engine speed and automatically adjust its fuel consumption to

match the required load. When the electrical load changes, the

generator engine will automatically speed up and slow down as

needed. This reduces fuel consumption and noise levels, while ex-

tending runtime and engine’s lifespan.

Fig. 1

Keep this switch engaged ONLY when the power load requirement is LESS THAN 75% of the

rated watts. Do not engage the switch when the total load is more than 75% of the rated watts.

The generator engine must run at full speed to supply power for anything over 75% of the rated

watts.