Instructions

5. Turn power on, update LED will flash RED and GREEN whilst data is written
to Control Box memory.
6. When SYNC LED goes out update is
complete.
Update completePower on LED will flash Red & Green
Please continue for Troubleshooting
STEP 3 - Pairing
1.
The Control Panel will read ERROR RF so you
will need to pair the Control Panel and
Control Box.
LED lights green
2. Briefly press (1 second) and release the
SYNC/update button on the front of the
Control Box. The Status LED will
illuminate green.
3. Press Satellite UP or Down
button on the panel to pair.
Your control box and control panel
are now paired. You are now ready
to use your Seeker Wireless Satellite
System.
Press for 1 secondPress and release button