Instructions
1. Turn on Control Box.
2. Press and hold the SYNC/Update button on the front of the Control Box for
approximately 7 seconds until SYNC/update LED illuminates RED.
STEP 2 - Update file to control box
Power on SYNC/
Update
button
SYNC/
Update
LED
USB
port
3. Insert the USB flash memory stick.
The SYNC LED will flash GREEN
whilst data is being transferred.
Transfer can take between 10-60 seconds.
4. When the SYNC LED goes out turn off the Control Box power and remove the USB
flash memory stick.
LED goes out Turn off power Remove USB stick
Push in and hold
for 7 seconds