User manual

8
SA-3340S Serial ATA Disk Array Systems
2 Basic Configuration – Installing Disks
Installing Disks
This section describes how to install disks in the disk array system.
1 Unlock the disk tray (A) then pull the disk tray handle to the opened position (B) and
remove the disk tray (C).
2 Insert the disk into the disk tray. The disk should face up with the connectors directed
toward the open rear of the tray.
3 Align the back of the disk with the back of the disk tray.
ESC
Enter
ESC
Enter
A
B
C