MAXTRA MAX ELECTRIC SCOOTER FOR ADULTS USER MANUAL
Thank you for choosing MAXTRA! Please take a few minutes to read this user manual . before using it.This manual will help you better understand your scooter and, with proper care, it will provide years of trouble-free use. If you have any questions, please do not hesitate to contact us. If you can attach some pictures or videos, it will help us better understand your difficulties.Our customer service team will give you a satisfactory reply within 24 hours.
Contents Must Read ............................................................................ 01 .................................................................... 02 Unpack .................................................................................. 03 Know Scooter ....................................................................... 04 Parts Replacement ................................................................ 05 Specifications .................................................
Always wear a helmet when riding your electric scooter. Make sure youre scooter has a full battery before taking it out to ride. Always be aware of local road laws,and follow them. Do not ride the scooter under the influence of drugs or alcohol. Always respect pedestrians. Do not ride under wet conditions. The scooter may slide from under your feet causing injury. Wet conditions may damage the electronics and void the warranty.
1. Avoid water - The scooter is not waterproof.The electronics may be damaged dueto water and water damage is not covered by our warranty.Riding in wet conditionsis also very dangerous and may result in injury. 2. Abuse - We do not cover physical damage due to negligent care and extremeriding. 3. Whenever you ride the MAXTRA scooter, you risk severe injury or even death from loss of control, collisions, and falls. Use caution and ride at your own risk. 4.
You should find each of these items in your box: 1. Electric Scooter 2. 6 Connecting screws(Installation requires only 4 ) 3. 3mm Allen Wrench 4. Approved Power Adapter / Charging Unit 5.
Led Panel Disc Brake Handle Throttle #4 Grip Electronic Brake Hook Headlight Stem Anti-Theft Lock #5 Front Fork Cover Fold button Deck Cover Front Fender #3 Front Wheel #1 Lithium Batter Pack #9 Rear Fender #6 Kickstand Tail Light Charge Port #7 Reflector Motor 04 #3Rear Wheel
Part# Image Part Name Quantity 1 Lithium Battery 1 2 Charger 1 3 Wheel 1 4 Grip 1 Front Fork Cover 1 6 Kickstand 1 7 Reflector 1 8 Disc Brake 1 9 Rear Fender 1 10 Tool Bag 1 5 05
Performance Index Items Parameters Length × Width × Height (folded) 45.3*17*46.5inch Length × Width × Height (unfolded) 48.4*17*13inch Weight Net. Weight 38.5lb Max. load 45~265lbs Riding Requirements Applicable age 16~50 Applicable Height 4~6.4feet Max. speed(km/h) 19mph Range 19miles Max.
Press the fold button and lift the stem vertically Connect the wire inside the handlebar and the stem,then insert the handlebar into the stem Use screws and wrenches to secure handlebar in place 07
Before using the scooter, you must fully charge the battery. 1.Open the charging port cover. 2.lnsert the charging plug into the port. 3.The charger box will have a green light when fully charged and a red light whencharging. 4. When you are done charging be sure cover the charging port to keep it clear ofdust and debris. 5.Charging Time: About 5 hours Charging Requirement: Make sure to charge your scooter in conditions that do notexceed 104 degrees Fahrenheit or below 32 degrees Fahrenheit.
Panel function Brake Level Speed Level Seep Cruise Light Mph Km/h Bluetooth S Speed Mode Start Button power A. Start, Turn on/off Light, Choose Speed Level, Shut 1. Press the start button : 1.1 Press the start button for 2 seconds to start E-scooter. 1.2 One touch of the start button to turn on or turn off the light. 1.3 Two continuous touches to choose different speed levels. One slash: 10mph; two slashes: 15mph; three slashes: 19mph. 1.
At the bottom of the stem is a built-in anti -the ft d evice in the form of asteel cable that can be locked with a nume rical code. 1.Lockin g head 2.Anti- theft cable 3.Anti- theft cable storage sp ace4.Lock 5. Lockin g butt on 7 6 6.Dials 7.Code reset button The default anti-theft device unlock code is: 0-0-0-0 1. Unlock the anti-theft device (default code 0000) 2. Slide the reset button to the right (SET mode) 3. Set a new code by turning the dials 4.
The E-scooter could be folded to save save and convenient to carry or store. Fold the kickstand Hold the front tube with your left hand, press the folding block. Press down the front tube to complete the folding operation. Hold the front tube with your left hand, press the folding block with your right hand. Unfold the kickstand, turn the front tube to the left to complete the unfolding operation.
wear an approved helmet and other protective gear to minimize any possible injury Mph Km/h S Turn the power on, and check the electricity indicator. Stand on the base with one foot and propel yourself with the other foot. When the electric scooter begins to glide, put both feet on the deck and press the accelerator. The speed shall be kept above 2mph for starting the throttle. Release the throttle and to reduce the speed slowly.
Please keep a medium or low speed (5mph) when you ride through speed bumps,elevator door sills, bumpy roads or other uneven surfaces Slightly bend your knee to better adjust mentioned surfaces Do not ride in the rain. Always steer clear of obstacles. Do not press the throttle when walking with the scooter. Look out for doors, elevators and other overhead obstacles. Do not accelerate when you go downhill. Do not hang bags or other heavy stuff on the handlebar.
14
Install the APP For Android users, scan the QR code on the left, and for IOS users, scan the QR code on the right to download the APP. Or search for "UNI SCOOTER "in the Android APP STORE/Apple APP STORE to download Turn on the scooter power, open the APP and click search. After searching the scooter code, click the code to link Mph Km/h S Vehicle Fans Moments Discover Me The scooter beep when the connection is successful.
Cleaning and Storage Use a soft, wet cloth to wipe the mainframe clean. Dirt hard to remove can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. NOTE Do not wash your scooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your Scooter. Do not wash your scooter with a power washer or hose.
When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F Typically, a fully charged battery should retain power for 120-180 days. A low-power battery should retain power for 30–60 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.