Technical data

Product Specifications
4-8 DiamondMax 10 80/100/120/160/200/250/300GB Serial ATA
4.10 Reliability Specifications
Annualized Return Rate
<1.0% Annualized Return Rate (ARR) indicates the average against
products shipped. ARR includes all reasons for returns (failures,
handling, damage, NDF) but does not include inventory credit
returns.
Start/Stop Cycles
>50,000 This indicates the average minimum cycles for reliable start/stop
function.
R=0.9998@ >4500, R=0.9995 @ >7500, R=0.5 @ >= 50000
Data Reliability
<1 per 10
15
bits read
Data errors (non-recoverable). Average data error rate allowed with
all errorrecovery features activated.
Component Design Life
5 years (minimum)
Component design life is defined as a.) the time period before
identified wear-out mechanisms impact the failure rate, or b.) the
time period up to the wear-out point when useful component life
expires.
4.11 EMC/EMI
4.11.1 Radiated Electromagnetic Field Emissions - EMC Compliance
The hard disk drive mechanism is designed as a subassembly for installation into a
suitable enclosure and is therefore not subject to Subpart J of Part 15 of FCC Rules
(47CFR15) or the Canadian Department of Communications Radio Interference
Regulations. Although not required, the disk mechanism has been tested within a
suitable end-use product and found to comply with Class B limits of the FCC Rules
and Regulations of the Canadian Department of Communications.
The CE Marking indicates conformity with the European Union Low Voltage
Directive (73/23/EEC) when the disk mechanism is installed in a typical personal
computer. Maxtor recommends that testing and analysis for EMC compliance be
performed with the disk mechanism installed within the user's end-use application.