Installation guide

ENGLISH - PAGE 2
MAXTOR SERIAL ATA HARD DRIVE INSTALLATION GUIDE
Introduction
Thank you for selecting a Maxtor hard drive product. This guide will lead you
through the installation of your new drive.
If you encounter any difficulties with installation, please visit us online at
www.maxtor.com and click on Worldwide Support .
The Maxtor SATA Hard Drive Kit includes the components shown in
Figure 1. Your computer may need some or all of these parts to complete
the installation. You will also need the tools shown in Figure 2 on page 3 to
install the hard drive in your computer.
Precautions
Drive should be at room temperature before installing.
Do not touch circuit board on drive.
Unplug system from electrical outlet before connecting
cables to drive or motherboard.
Do not drop, bump, or jar drive.
Max•Blast
™
FIGURE 1 INCLUDED IN THIS KIT
1. Maxtor Serial ATA (SATA) Hard Drive
2. SATA Interface Cable
3. Driver CD or Diskette
4. Mounting Screws